Products
Mintech V3 CNC router milina
- Spindle maotera: 4KW manual fitaovana fanovana 40000RPM
- Haingam-pandeha: 40000RPM
- Cooling: fampangatsiahana rano
Famaritana milina
| MODELY | V3 |
| Volavola miasa | AC380V / 50HZ / 3PH |
| Habe miasa | 1200mm * 600mm * 100mm |
| Ny haavon'ny andry mankany amin'ny latabatra miasa | 200mm |
| Z axis Travel | 280mm |
| Max hafainganam-pandeha miasa | 20m/min （Fitaovana ilaina amin’ny fanapahana ambony indrindra） |
| Haingam-pandeha ambony indrindra | 30m/min |
| Ny fahamarinan'ny toerana miverimberina | + / - 0,05 mm |
| Fomba mitondra fiara | X, Y axis dia manangana fifindran'ny fifindran'ny fitaovam-pitaterana, tizy Z axis dia mampiasa ny visy baolina avo lenta. |
Lisitry ny Configuration Machine
| tsy misy | Des. |
| fikirana | fanamarihana |
| 1 | Faritra miasa | Saran'ny fanodinana X axial | 600mm |
|
| Y axial sehatra fanodinana | 1200mm |
| ||
| Z axial sahan'ny fanodinana | 100mm |
| ||
| 2 | milina mari-pamantarana | X, Y, Z axial motion positioning marina | 0.05mm/300mm |
|
| X, Y, Z axial motion positioning marina | 0,05 mm | |||
| Fifindran-toerana ambony indrindra hafainganam-pandeha | 30m/min | |||
| Fikarakarana ambony indrindra hafainganam-pandeha | 20m/min | |||
| lanjan'ny milina manontolo fitaovana | 1500KG | |||
| fitaovana milina miasa Zintin'aratra | AC380V/50HZ/3PH | |||
| 3 | Latabatra miasa | latabatra aluminium | latabatra banga |
|
| worktable entana | 200KG |
| ||
| 4 | Software | Wei Hong rafitra fanaraha-maso nomerika matihanina | Weihong fitantanana rafitra |
|
| 5 | Mpanova fitaovana | Tsy misy fitaovana fitahirizam-boky | Fanovana fitaovana tanana |
|
| 6 | Hery mitondra fiara(Servo maotera） | X axial fiara motera | Servo maotera | Delta |
| Y axial fiara moto | Servo maotera | Delta | ||
| Z axial fiara motera | Servo maotera | Delta | ||
|
|
|
| ||
| 7 | Spindle elektrika(fiovam-po matetika） | ampela | Fampangatsiahana rano |
|
| hafainganam-pandehan'ny spindle | 40000RPM |
| ||
| herin'ny spindle | 4KW | Fanovana fitaovana tanana | ||
| Spindle taper | ER25 |
| ||
| Spindle dynamic balance level | G2.5 |
| ||
| Frequency mpanova | Ivnt |
| ||
| 8 | Lalana mpitari-dalana | X axle mpitari-dalana | lalamby mpitari-dalana efamira (20mm) | TBI |
| Y axle guide rail | lalamby mpitari-dalana efamira (25mm) | TBI | ||
| Z axle guide rail | lalamby mpitari-dalana efamira (20mm) | TBI | ||
| 9 | fiara | X shaft fiara | visy baolina |
|
| Y shaft drive | visy baolina |
| ||
| Z shaft fiara | visy baolina | TBI |
atrikasa
