Q1: Causes of plate breakage of pc board processing equipment.
The pc board processing equipment is one of our machines for processing and cutting. Because the pc board processing equipment is easy to operate, complete functions, good engraving and cutting effects, it is an entry-level preferred product, so many companies choose to use this. However, during the use of the equipment, many enterprises and manufacturers did not comply with the standards used, which caused problems with the board. So today, let's summarize the reasons for the damage of the pc board during processing.
1. Use sealant and sealant pads suitable for polycarbonate plastics. The wet test sealant paste shall be applied when the management system is installed in the wet test.
2. The CNC blades or articles used in the production and processing must not cause any harm to the non-production processing position of the plate, and the wound can be moisturized. Because minor hazards can also lead to unoptimistic cracking.
3. Do not destroy or remove the protective film before the installation is completed to avoid scratching the surface.
4. It is never allowed to nail the PC board to the frame immediately, otherwise it will cause high stress and destroy the edge of the hole due to the expansion of the board.
Mintech Electronics' products are mainly used in: aerospace, rail transit, boats, special vehicles, building curtain walls, etc.; fundamentally solve technical problems in the processing of aluminum alloys, engineering plastics and other sheet materials, so as to continuously promote the development of processing equipment Technology upgrade; is the current domestic technological model industrial-grade CNC machining equipment manufacturer.
Q2: The use of aluminum engraving machine.
Aluminum plate engraving machine can be said to be very common in today's society. From its name, everyone can know that this equipment is used to engrave aluminum plates, especially the engraving of aluminum plates. But in fact, this is only a narrow device. A role. We can use the aluminum plate engraving machine to do a lot of precise engraving and cutting. The specific details depend on the specific aluminum plate cutting thickness. So today, let's get to know the aluminum plate engraving machine.
Engraving is actually not a particularly easy task, especially for engraving on aluminum plates. This can be said to have been a long, long time task in the past, but the emergence of aluminum plate engraving machines has changed all of this. For other industries In other words, the role of aluminum plate engraving machine is also very wide, and it is also irreplaceable, but it is more a symbol of the progress of the times, people's labor intensity has been significantly reduced, and work efficiency has also been greatly improved.
In addition to the basic engraving function, the aluminum plate engraving machine can also perform cutting and cutting. It is a machine equipment that can be purchased even if the manufacturer is not performing the engraving function. The emergence of the aluminum veneer equipment makes engraving possible, and it has also become much more convenient and faster.
Aluminum plate engraving machines are generally widely used in the aluminum plate engraving industry. In addition to standard operation techniques for the aluminum veneer equipment, special attention should be paid to whether the thickness of the aluminum plate of the workpiece to be processed is the engraving that the equipment can withstand. Range, so you need to pay attention to it. Generally speaking, the aluminum plate engraving machine can engrave 2 mm thick aluminum plates at most, so that the thickness of the aluminum plate can be penetrated by the engraving machine.
For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics develops and produces better aluminum plate engraving machines and plate cutting machines, which have better cutting efficiency and higher cutting accuracy. Welcome to consult us.
Q3: How to check the problem of pp sheet cutting machine.
CNC machine tool processing equipment needs a maintenance process if it is used for a long time. Because high-end precision equipment needs to ensure that our products are processed, the error rate is minimized, and the finished product is displayed in the most perfect posture. . The pp sheet cutting machine is no exception. As a large-scale CNC machine tool that can cut many sheets, maintenance is also indispensable. Today we will look at the problems of the pp sheet cutting machine .
1. The pp sheet cutting machine regularly cleans the dust in the electrical box (according to the usage) and checks whether the terminal screws are loose to ensure the safe and reliable use of the circuit.
2. The pp sheet cutting machine regularly (according to the usage) checks whether the screws of each part of the machine are loose.
3. After using the pp sheet cutting machine, pay attention to cleaning up. Be sure to clean up the dust on the platform and transmission system, and lubricate the transmission system (XYZ three-axis) regularly (weekly).
4. The continuous running time of the pp sheet cutting machine is less than 10 hours a day to ensure the cleanliness of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be lacking in water, and the cooling water should be replaced regularly to prevent the water temperature from being too high.
Whether it is a sheet cutting machine or other CNC machine tools, the service life of the equipment and the efficiency of the equipment are a point of concern. Therefore, we need to maintain the sheet cutting machine and other equipment. For specific details, please consult our official website. Our service staff and professional knowledge will answer your questions about the use of equipment at any time.
Q4: Advantages of panel cutting saws.
What is the difference between a panel cutting saw and other saws on the market? Our panel cutting saw has fast cutting speed, high cutting accuracy, simple operation, high safety factor and good dust collection effect. Unlike other saws, it is noisy and polluting, and through our research, the new panel cutting saw can process acrylic, wood, various plastic materials, electronic insulation materials, bakelite, aluminum-plastic panels, etc., suitable for most industries , Today we will take a look at the advantages of panel cutting saws.
2. No need for professional workers, reducing labor costs.
Before using the electronic cutting saw, the key links of material cutting such as calculation of the manual layout plan and command input are inseparable from the skilled host. You need to pay several thousand yuan of workers' wages every month; use the electronic saw to realize the key links of material cutting. With the automatic computer operation, the cutting process becomes simple and convenient, and the ordinary work can be competent for the work of the host. Before officially starting work, it is necessary to conduct a comprehensive inspection of the electronic cutting saw, check whether the link bolts of each part of the cutting machine are loose, check whether the driving device of the cutting machine is running smoothly, and check the opening of the cutting machine. Whether each button is normal, in addition, check whether the lubrication system, pneumatic system and various safety systems of the feeder are intact. When these have been checked, there is no problem before normal startup operation can be carried out.
3. Refined discharge, high raw material utilization rate.
With ordinary saws, the number and size of the cutting materials are completely calculated by the human brain. It is believed that errors are difficult to avoid. The quality of the cutting plan depends more on the proficiency and professional level of the workers. The raw materials are often not fully utilized, resulting in a large number of expectations. The remaining material is rarely recovered, causing great waste; after the transformation, the layout plan is calculated by the computer to realize the optimal layout of the plate. The bar code technology is used to track and manage the remaining material, and the next layout plan will give priority to the use of the last remaining The raw material utilization rate has been significantly improved. Before formal processing, it is best to run the electronic cutting saw in a dry run, because only dry run can ensure that all parts of the machine are very normal and ensure safety.
Mintech Electronics focuses on the R&D and production of panel cutting saws, and has its own industrial production line, which can control the quality of the product in one step, and control every step of the production process. For specific details, please call our service hotline: 138-2577-9334. Welcome to consult.
Q5: How to choose CNC router.
CNC router is a comprehensive CNC machine tool processing equipment . It can perform precision cutting activities on pp sheet, pc sheet, aluminum sheet and other plates. With the development of modern machinery processing industry, the quality of cutting With the continuous improvement of precision requirements, the requirements for improving production efficiency, reducing production costs, and having high-intelligence automatic cutting functions are also increasing. Today, let's take a look at how to choose the right cnc cutting machine.
One, clear the plate to be processed and the processing to go.
First of all, we must consider our business scope, the thickness of the cutting material, which materials need to be cut and other factors, and then decide the specifications of the equipment to be purchased and the size of the worktable. . Manufacturers with average workbench sizes can customize them according to customer needs.
Second, after-sales service.
The after-sales service of each manufacturer varies widely, and the warranty period is also uneven. In the after-sales service, we not only provide customers with effective daily maintenance programs, but also have a professional training system for machines and operating software to help customers get started as soon as possible.