What industries can plank cutting saw be used for?

The technology of plank cutting saw adopts non-contact processing, which can minimize the processing deformation, prevent the wood board from cracking, and reduce material waste.

What problems should be paid attention to when using plank cutting saw?

1. When the plank cutting saw is on the knife, clean the chuck and the pressure cap with a cleaning agent.

2. Put the collet into the plank cutting saw pressure cap, otherwise the tool will not be easy to install. If the collet is not clamped in the pressure cap, the collect will be clamped in the motor shaft and cannot be removed when the tool is unloaded.

3. Before clamping, pay attention to whether the chuck matches the selected tool.

What industries can plank cutting saw be used for?

plank cutting saw is used in many industries, such as display cabinets, die mold industry, furniture industry, etc., all use wooden boards. Generally, different industries use different machines. For example, the display cabinet industry, as long as the low-power The machine can do it, because its materials are generally relatively thin, only three to five mm thick MDF, this kind of plate, its cutting requirements are not high, as long as low power is enough. If you use high power to cut, it may be Machine tools cannot adapt to such high power.

Another industry where plank cutting saw is applied is the die industry, the die industry, which requires higher power, because the thickness of this board is relatively thick, it is different from the display cabinet industry, and its cutting requirements are also It is different from other industries. Therefore, when cutting the knife mold board, it is necessary to use high power to cut. If you want to cut fast, you can use high-speed axial flow and high power to cut. The cutting speed of plank cutting saw should be faster.

What is the principle and composition of plank cutting saw?

The principle and composition of plank cutting saw: plank cutting saw is composed of three parts: computer, engraving machine controller, and engraving machine main body.

The working principle of plank cutting saw is to carry out pattern design and typesetting through the special engraving software configured in the computer. The information of design and typesetting is transmitted to the plank cutting saw controller through the computer, and then the controller converts the information into the power to drive the stepper. The pulse signal of the motor or servo motor controls the positioning of the engraving tool on the X, Y and Z axes of the main body of the plank cutting saw.

At the same time, the controller starts the frequency converter to drive the engraving head of the spindle motor to rotate at a high speed, and cuts, drills and mills the processing material fixed on the worktable of the host, and then engraves various plane or three-dimensional relief graphics designed in the computer. And text, to achieve automatic engraving operations, according to different processing materials and process requirements, can be matched with different special configuration tools.

The widespread use of plank cutting saws has continuously increased the demand for them in the market. Dongguan Mintech Electronic Co., Ltd., as a Chinese pioneer in plank cutting saw, can ensure the machines’ quality and after-sales service.