What is the workflow of composite aluminum honeycomb cutting router?

The composite aluminum honeycomb cutting router is a high power density beam through the optical path system. The beam is irradiated on the surface of the workpiece, making the workpiece reach the melting point or boiling point, while the high-pressure gas coaxial with the beam blows the molten or vaporized metal away.

What problems should be paid attention to when using aluminum honeycomb cutting router?

In addition to the basic engraving function, the aluminum honeycomb cutting router can also perform cutting and cutting. It is a machine that even manufacturers who are not engraving can buy. The appearance of this aluminum veneer equipment makes engraving possible, and it also becomes much more convenient and faster.

aluminum honeycomb cutting routers are generally widely used in the industry of aluminum plate engraving. For this aluminum veneer equipment, in addition to standard operating techniques, it is also necessary to pay special attention to whether the thickness of the aluminum plate of the workpiece to be processed is acceptable to the equipment. In the engraving range, some particularly thick aluminum plates cannot be engraved by this engraving machine, so special attention is required.

What are the precautions for composite aluminum honeycomb cutting router work?

1. The size of the condensation of the composite aluminum honeycomb cutting router. After gathering, if the light spot is very small, the cutting precision is very high, and the gap after cutting is also very small. It means that the precision of ther cutting machine is very high and the quality is very high. But the beam emitted by the is tapered, so the slits cut out are also tapered. Under this condition, the greater the thickness of the workpiece, the lower the accuracy, and therefore the larger the kerf.

2. The accuracy of the workbench. If the precision of the table is very high, the precision of cutting will also be improved. Therefore, the accuracy of the workbench is also a very important factor to measure the accuracy of the composite aluminum honeycomb cutting router.

Which sheets can the aluminum honeycomb cutting router be used for?

Generally speaking, the aluminum honeycomb cutting router can engrave aluminum plates with a thickness of 2 mm at most, and the aluminum plates with such a thickness can be penetrated with one knife through the engraving machine. Remind you that if you do not want to completely penetrate the past, you can use the aluminum veneer in its aluminum veneer. Adjust the data on the device, or choose a relatively thick aluminum plate.

Of course, the aluminum honeycomb cutting router has no problem at all to engrave aluminum plates with a thickness of more than 2 mm. If it is to engrave thicker aluminum plates, the operator needs to purchase the aluminum veneer equipment with a relatively large capacity.

Dongguan Mintech Electronic Co., Ltd. maintains close relationships with customers in aluminum honeycomb cutting router industry, and is committed to strengthening production and operation, as well as improving quality and safety.