How can we use the plank cutting saw?

The plank cutting saw can ensure the high precision of cutting, the preferred format for sheet metal processing, and the wide processing range, which is suitable for various laser processing technology needs.



What are the characteristics of a nylon beam saw with optimizer?

The nylon beam saw with optimizer cuts plastic sheets quickly and accurately. A panel saw differs from other types of saws because it has a fixed horizontal beam that houses a moving saw frame assembly. The rear area of the saw includes an electronically controlled fence with clamps that move material precisely to the cutting line for processing. The control part of the panel saw is capable of executing computer-generated optimized cutting programs. If you are considering upgrading your existing saw or purchasing a new panel saw, here are some things to consider: Styles of Nylon beam saw with Optimizer - Panel saws come in three basic styles: front load, rear load and angle.

What are the relevant parameters of the nylon beam saw with optimizer?

Sizes - Nylon beam saws with optimizers are available in three basic sizes, although some manufacturers make custom units for special projects. Common sizes are 10-, 12-, and 14-foot saws, each of which typically accommodates oversized panels over 6 inches; a 12-foot saw can accommodate panel sizes up to 12.5'x 12.5'. When calculating the size requirements for your operation, be sure to include factors in addition to the original panel size. The cutting pattern and feed table size affect the amount of space required to reposition the panels for cross-cutting. Future needs should also be considered.

Cut Height - Cut or stack height is another way of classifying nylon beam saws with optimizers and refers to the maximum cut height that can be performed on a single sheet or stack of sheets. Most manufacturers offer a range of saws with cutting heights ranging from 2" to 5", with a few manufacturers offering 6" heights. Some things to consider when choosing a cutting height are obvious, such as current and near-term production requirements.

How to maintain plank cutting saw?

1. Oil the bearing. The plank cutting saw uses a lot of bearings. In order to ensure a good cutting effect, some bearings need to be oiled regularly. Use a clean soft cloth to wipe off the floating soil on the bearings. Use a needle to suck the oil into the needle, and then slowly inject the bearing with a needle. Just turn the bearing slowly when filling with oil.

2. Adjust the tightness of the timing belt (belt). There are several synchronous belts in the transmission system of the plank cutting saw. If the synchronous belt is too loose, ghosting will occur, and if the synchronous belt is too tight, the synchronous belt will be worn out. After using for a period of time, please adjust the tension screw of the synchronous belt to adjust the synchronous belt to a proper tightness.

Dongguan Mintech Electronic Co., Ltd. has focused on the production and development of plank cutting saws for more than several years, and they have always put the needs of customers as their top priority.