01
CO2 Laser Cutting Machine MC-1250 Laser
-
Working area:W:1250mm, L:900mm
-
Laser tube:150W/300W
-
Cutting head:Quick install, precision adjust
Product Introduction
Our CO2 laser cutting machine features a screw-drive transmission paired with a high-precision cutting system. The laser is housed in a metal shell with a coalescing design that effectively guards against high voltage, ensuring a safe and stable operating environment. Moreover, this design grants the laser a stable structure that is resistant to deformation, facilitating safe long-distance transportation. Notably, the mirrors within the laser cavity are sourced exclusively from II-VI Incorporated in the United States, representing the industry's gold standard to ensure outstanding beam quality and an extended operational lifespan. Additionally, our CO2 laser cutter is enhanced with an optical path coupling and beam combining device, further refining the beam quality. With this device, flawless cutting of acrylic materials up to 30mm in thickness is achieved. For thin sheets, the machine also operates at remarkable speeds. Whether dealing with thicker materials or fast-paced thin sheet cutting, our CO2 laser cutting machine is a trustworthy tool. Its high-precision cutting system, stable structure, superior beam quality, and durability will efficiently fulfill a variety of cutting tasks.
MC-1250 with high quality configuration: Here are industrial standard configuration including fixed beam optical laser system, cutting following system, Mitsubishi servo system, imported ball screw, water-cooling system, Red-light pointer,exhaust-air system, off-computer system so as to guarantee high precision and reliability meanwhile make the machine more cost-effective!
Mc-1250 Detailed Configuration
Item | Specification | Remark |
Working area | W:1250mm,L:900mm | Machine annealing and precision machining |
Laser tube | 150W/300W | Optional |
Cutting head | Quick install, precision adjust | Mintech |
fixed beam | beam compensation | Mintech |
Polarizer system | X/Y same cutting gap | Mintech |
Mirror | High reflecting(>99.5%) | from USA |
Machine driven system | X/Y axis ball screw | Import from Taiwan |
X/Y/Z TBI/PMI linear guide | Import from Taiwan | |
Special cooling system | Precision:±0.5℃,protection:compressor protection;water flow;high temp、low temp | S&A/TongFei |
Control system | Off line control | Ruida |
Servo motor | MITSUBISHI | Import from Japan |
Software | Ruida | |
Section exhaust | two section | Mintech |
Main contactor | LS | Import from Korea |
Main solenoid valve | SMC | Import from Japan |
Origin switch | Optoelectronic | Import chip |
Machine cable | High flexible cable | Yichu |
Water cooling mirror | Stable working guarantee | Mintech |
Lens | It is made from Bejing |
Technical specification
PARAMETER | MC-1250 | |
Laser output power (W) | 150/300 | |
M2- Transverse mode quality | M2≤1.1 | |
Worktable dimension(mm) | 1250×900 | |
Worktable load (kg) | 300 | |
Acryl cutting ability(mm) | 30 | |
Dieboard cutting ability(mm) | 12 | |
Speed of positioning (m/min) | 20 | |
Positioning accuracy(mm/m) | ±0.05 | |
Repeatability accuracy(mm) | ±0.05 | |
Travel | X-axis(mm) | 1250 |
Y-axis(mm) | 900 | |
Z-axis(mm) | 60 | |
Power supply(50/60Hz) | Single-phase 220V | |
Full current(A) | 30 | |
Pressure of accessorial gas (MPa) | 0.6 | |
Dimensions(L×W×H) (mm) | L:2110mm W:1610mm H:1140mm | |
Machine net weight (kg) | 600KG | |
Room dimensions(L×W)(mm) | L:2110mm W:1610mm |
Environment Requirement
Item | Description | Remark |
Machine floor Space | 2110mm X 1610mm X 1140mm | |
Power request | 1 phases 220VAC±10%/30A | |
Chiller temperature | 15-30℃ | Adjust according to the environment temperature and humidity |
Environment temperature | 15-28℃ | Operational temperature |
Store temperature | >5℃ | |
Relative humidity | <60% | |
Floor requirement | Slab floor should brushed lacquer | Keep away from Shaking source |
Workshop environment | Clean and dustless | |
Computer | P4/256M/WIN2000 or above version | Minimum requirement |
Air compressor | Capacity, 0.7m3; pressure, 7kg/cm3 (100psi) | The dimension of the interface is φ8mm |
Demineralized water or distilled water | 20L | Should be changed every 3 or 4 months |
Package Dimension | 2060mm*1880mm*1450mm | |
PackageWeight | 1000KG | |
Note:The above terms are necessary for the normal operation. The loss caused by the customer fails to meet the above terms should be taken by the customer. |