Cnc Router

Products Categories

Mintech MV-2500-SR25i-Rofin Laser

Mintech Ball Screw Laser Machine MC-2500

Mintech V8 CNC Gantry Machining Center

Mintech MYD-1360 Acrylic double side ...

Mintech Cnc Beam Saw MS2600 Machine

Mintech Laser Machine HC - 1250

Mintech Acrylic High Speed Polishing ...

Mintech Laser Cutting Machine MC-6050...

Mintech V3 CNC Router Machine

Operation software using WeiHong handle control system.

Tool compensation function: support tool radius compensation and length compensation measured by both manual and automatic modes,easy to understand human-computer interface,make users reduce the conversion of tool compensation values. For users using tool length compensation，avoidance of many unnecessary conversions.

Model V3
Working voltage AC380V / 50HZ / 3PH
Working size 1200mm * 600mm * 100mm
The height from beam to working table 200mm
Z axis travel 280mm
Max working speed 20m/min (Tools required for maximum cutting)
Maximum idle speed 30m/min
Repeated positioning accuracy + / - 0.05mm
Driving mode X, Y axis adopt bevel gear rack transmission, the Z axis adopts the high precision ball screw drive.

product details

product description

Cutting Spindle

Model：V3

Spindle motor ：4KW manual tool change 40000RPM
Spindle speed ：40000RPM
Cooling：water cooling

Machine Specification

Model	V3
Working voltage	AC380V / 50HZ / 3PH
Working size	1200mm * 600mm * 100mm
The height from beam to working table	200mm
Z axis travel	280mm
Max working speed	20m/min（Tools required for maximum cutting）
Maximum idle speed	30m/min
Repeated positioning accuracy	+ / - 0.05mm
Driving mode	X, Y axis adopt bevel gear rack transmission, the Z axis adopts the high precision ball screw drive.

Control system

Operation software using WeiHong handle control system.

Program simulation and real-time simulation, provides powerful program simulation capabilities, can fully display the process of rough cutting. The program simulation function also supports the transition between the analog interface and the processing interface at any time. It is convenient for users to monitor the processing program in real time to make the processing convenient.

Cutting Spindle

Spindle motor ：4KW manual tool change 40000RPM

Spindle speed ：40000RPM

Cooling：water cooling

Working table

Aluminum table with T-slot & high-pressure Vacuum pump.

The vacuum table is equipped with a sink around the edge, and is equipped with a water supply and drainage system.

List Of Machine Configurations

NO	Desc.		Parameter	Remarks
1	Working area	X axial processing scope	600mm
		Y axial processing scope	1200mm
		Z axial processing scope	100mm
2	Machine parameter index	X,Y,Z axial motion positioning accuracy	0.05mm/300mm
		X,Y,Z axial motion positioning accuracy	0.05mm
		Maximum displacement speed	30m/min
		Maximum processing speed	20m/min
		total weight of machine tools	1500KG
		machine tool operating voltage	AC380V/50HZ/3PH
3	Working table	aluminum table	Vacuum table
3	Working table	worktable load	200KG
4	Software	Wei Hong professional numerical control system	Weihong handle system
5	Tool changer	No tool library	Manual tool change
6	Drive power（ Servo motor ）	X axial drive motor	Servo motor	Delta
		Y axial drive moto	Servo motor	Delta
		Z axial drive motor	Servo motor	Delta

7	Electric spindle（frequency conversion）	spindle	Water cooling
		spindle speed	40000RPM
		spindle power	4KW	Manual tool change
		Spindle taper	ER25
		Spindle dynamic balance level	G2.5
		Frequency converter	Ivnt
8	Guide rail	X axle guide rail	square guide rail (20mm)	TBI
		Y axle guide rail	square guide rail (25mm)	TBI
		Z axle guide rail	square guide rail (20mm)	TBI
9	Drive	X shaft drive	ball screw
		Y shaft drive	ball screw
		Z shaft drive	ball screw	TBI